Vivolink VLMC350S-W project mount Ceiling White

TM-1200

AE016050-P1

VLMC200

VLMC350S-B

VLPS100

The Techmount is a universal projector ceiling bracket designed to secure most video data projectors safety and sturdily to your ceiling. We only have one projector ceiling bracket in our range: it comes with a 1.1m pole and it is designed to be useful in 99% of installations. That means built in flexibility allowing quick assembly in a number of different configurations, including "flush-mount" where the projector is as close to the ceiling as possible. We believe the fixed pole style we use is the best for rigidity, and because you cut it to length onsite, it has an infinitely variable length. Safety Approved We believe it is good practise to use a safety fall-arrest tether which secures the projector to your bracket, so we've included one. 20kg SWL Independent testing on calibrated hydraulic test equipment has shown a breaking-strain of half a ton! We recommend a maximum safe working load of 20kg which is well within it's limits. Obstruction-free Cable Management Rather than having a long bolt that runs through the pipe and blocks cable access, we use our unique quad-bolt Chute-through system which leaves cable access clear - even for a big VGA connector. Secure We believe quick-release mechanisms make life easier for thieves, so our mount is secure and features security bolts. Sloping Ceilings? If you have a sloping ceiling there is a tilting mechanism included which tilts to a full 90 degrees, allowing you to use the bracket as a boom if need be. Tools Included A spanner and pin-hex key are included. The only tool you'll need is a 2" pipe cutter (NOT INCLUDED - ask your hardware supplier for a pipe cutter with a 6-67mm range, and a metal cutting disk). With this tool you'll cut the pole like a knife through butter. We've also included a drilling jig so you can easily and accurately drill 9mm holes into the pole. Easy fit Fitting the bracket to the projector is simple; most projectors have threaded inserts in the bottom for attachment. But because not all use the same diameter screws we provide a selection of screws to suit almost all projectors. Simply adjust the arms on our bracket over the attachment holes, and insert a screw into the projector. Finish the job properly! TM-1200 Trim Disk Aesthetics are also enhanced by our exclusive retrofittable trim disk which is fitted to the pole in false-ceiling environments to properly finish the installation.

Short-throw projection close to the wall.
A wall bracket that is easy to mount on a wall plate that can be located close to the ceiling, making vertical adjustment possible. The projector can be suspended at any location along the complete pillar, and it can be swivelled and tilted. Now with black or white plastic fittings, and the possibility to use a white or black universal slide to match the projector.

PROJECTOR MOUNT

Adjustable height 38cm - 55 cm
Support tilt function for perfect distance fit to screen.
Typical installations:
Meeting rooms, restaurants, offices and hotels.

Fixed 25,5cm from ceiling Support 35kg load, top/bottomn tilt function for perfect fit to screen.
Cables are hidden inside pole.


Tilting Design: allows maximum viewing ability.
Adjustable Length: for your different choices.
Ceiling plate can be fine tune adjusted for easy reposition.
Detachable Head Section: makes installation easier.
Adjustable Support Arms: fit most projectors hole distance from 130mm to 470mm.

VLPS100 is ideal solution for flexible use of projector


Free-Tilting Design makes it easy to adjustment best angle
Safety edge Stoppers prevents devices from slipping
Heavy-Duty Casters with Locking Mechanism
Easy Assembly: Installation is as easy as 1-2-3


Ideal for flexible use in class room

TM-1200

Projector WL Short Throw V

Pro Ceiling Projector Mount, 15kg Capacity, 380-550mm, Aluminium, White

Pro Ceiling Mount, Max 35 kg max, 255 mm, 360°, Black

Projector cart white

Vision

SMS Smart Media Solutions

VivoLink

VivoLink

VivoLink