We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
PLANET IGS-5225-16T4S network switch Managed L2+ Gigabit Ethernet (10/100/1000) 1U Blue
SKU
IGS-5225-16T4S

£544.32
£453.60
In Stock
Industrial L2+ 16-Port 10/100/1000T + 4-Port 100/1000X SFP Managed Ethernet Switch
Secure fast payment on this purchase
Free delivery on orders over £100
- Physical Port
- 16-port 10/100/1000BASE-T RJ45 copper
- 4 100/1000BASE-X mini-GBIC/SFP slots, compatible with 100BASE-FX SFP
- RJ45 to RS232 DB9 console interface for basic management and setup
- Hardware Conformance
- One 100 to 240V AC or dual 36 to 60V DC power input, redundant power with polarity reverse protection function
- Active-active redundant power failure protection- Backup of catastrophic power failure on one supply- Fault tolerance and resilience
- 19-inch rack-mountable design
- IP30 metal case
- Supports 6000V DC Ethernet ESD protection
- Minus 40 to 75 degrees C operating temperature for DC power input
- Minus 10 to 60 degrees C operating temperature for AC power input
- Digital Input & Digital Output
- 2 Digital Input (DI)
- 2 Digital Output (DO)
- Integrates sensors into auto alarm system
- Transfers alarm to IP network via email and SNMP trap
- Layer 3 IP Routing Features
- Supports maximum 32 static routes and route summarization
- Layer 2 Features
- Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
- High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
- Storm control support
- Broadcast/Multicast/Unknown unicast
- Supports VLAN
- IEEE 802.1Q tagged VLAN- Up to 255 VLANs groups, out of 4095 VLAN IDs- Provides Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)- Private VLAN Edge (PVE)- Protocol-based VLAN- MAC-based VLAN- IP subnet-based VLAN- Voice VLAN
- Supports Spanning Tree Protocol
- IEEE 802.1D Spanning Tree Protocol (STP)- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN- BPDU Guard
- Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP)- Cisco ether-channel (static trunk)- Maximum 10 trunk groups, with 8 ports for each trunk- Up to 16Gbps bandwidth (full duplex mode)
- Provides port mirror (many-to-1)
- Port mirroring monitors the incoming or outgoing traffic on a particular port
- Loop protection to avoid broadcast loops
- Supports E.R.P.S. (Ethernet Ring Protection Switching)
- IEEE 1588 and Synchronous Ethernet network timing (Port1 ~ 12)
- Quality of Service
- Ingress shaper and egress rate limit per port bandwidth control
- 8 priority queues on all switch ports
- Traffic classification
- IEEE 802.1p CoS- ToS/DSCP/IP precedence of IPv4/IPv6 packets- IP TCP/UDP port number- Typical network application
- Strict priority and Weighted Round Robin (WRR) CoS policies
- Traffic-policing policies on the switch port
- DSCP remarking
SKU | IGS-5225-16T4S |
---|---|
EAN | 4711605281881 |
Manufacturer | Planet |
Availability | Y |
Summary Feature title 1 | Power over ethernet |
Summary Feature value 1 | No |
Summary Feature title 3 | Ports type |
Summary Feature value 3 | Gigabit Ethernet (10/100/1000) |
Summary Feature title 4 | Ports quantity |
Summary Feature value 4 | 16 |
Management features | |
---|---|
Reset button | Yes |
Multicast support | Yes |
Traffic classification | Yes |
ARP inspection | Yes |
Switch type | Managed |
Web-based management | Yes |
System event log | Yes |
Quality of Service (QoS) support | Yes |
Switch layer | L2+ |
Ports & interfaces | |
Copper ethernet cabling technology | 10BASE-T, 100BASE-T, 1000BASE-T |
SFP module slots quantity | 4 |
Basic switching RJ-45 Ethernet ports quantity | 16 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Gigabit Ethernet (copper) ports quantity | 16 |
Console port | RJ-45 |
Network | |
IGMP snooping | Yes |
MAC address auto-learning supported | Yes |
MAC address auto-aging supported | Yes |
Copper ethernet cabling technology | 10BASE-T, 100BASE-T, 1000BASE-T |
Networking standards | IEEE 1588v2, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
Full duplex | Yes |
VLAN support | Yes |
Spanning tree protocol | Yes |
Rate limiting | Yes |
Port mirroring | Yes |
Link aggregation | Yes |
Flow control support | Yes |
Broadcast storm control | Yes |
Auto MDI/MDI-X | Yes |
10G support | No |
Virtual LAN features | Private VLAN, Tagged VLAN, Protocol-based VLAN |
Virtual LAN features | |
VLAN support | Yes |
Virtual LAN features | Private VLAN, Tagged VLAN, Protocol-based VLAN |
Technical details | |
Form factor | 1U |
Product colour | Blue |
Housing material | Metal |
Rack mounting | Yes |
Data transmission | |
Jumbo frames | 9000 |
Throughput | 29.76 Mpps |
MAC address table | 8000 entries |
Switching capacity | 40 Gbit/s |
Store-and-forward | Yes |
Jumbo frames support | Yes |
Security | |
IP-MAC-Port binding | Yes |
BPDU filtering/protection | Yes |
Authentication | Guest VLAN, MAC-based authentication, Port-based authentication |
SSH/SSL support | Yes |
Security algorithms | SNMPv3, SSH, SSL/TLS |
IGMP snooping | Yes |
Access Control List (ACL) | Yes |
Multicast features | |
Multicast support | Yes |
Certificates | |
---|---|
Certification | FCC Part 15 Class A, CE |
Design | |
International Protection (IP) code | IP30 |
Reset button | Yes |
Form factor | 1U |
Product colour | Blue |
LED indicators | Yes |
Housing material | Metal |
Certification | FCC Part 15 Class A, CE |
Rack mounting | Yes |
Performance | |
Harmonized System (HS) code | 85176990 |
Indication | |
LED indicators | Yes |
Power | |
Power consumption (max) | 15.2 W |
AC input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Redundant power supply (RPS) support | Yes |
Input current | 0.4 A |
DC input voltage | 36 - 60 V |
Power over Ethernet (PoE) | |
Power over Ethernet (PoE) | No |
Operational conditions | |
Storage temperature (T-T) | -40 - 85 °C |
Storage relative humidity (H-H) | 5 - 95% |
Operating temperature (T-T) | -10 - 60 °C |
Operating relative humidity (H-H) | 5 - 95% |
Heat dissipation | 51.8 BTU/h |
Weight & dimensions | |
Width | 440 mm |
Depth | 200 mm |
Height | 44.5 mm |
Weight | 2.67 kg |
You may also be interested in
Product |
![]()
£544.32
£453.60
|
![]() Popular
Cisco Small Business Catalyst 2960X-24...
£588.67
£490.56
|
![]() Recommended
LevelOne 6-Port Gigabit PoE Industrial...
£563.77
£469.81
|
![]() Bestseller
LevelOne TURING 26-Port Web Smart Giga...
£811.22
£676.02
|
![]() New
NETGEAR XS508M Unmanaged 10G Ethernet...
£460.27
£383.56
|
![]() Hot Product
Mikrotik CRS328-24P-4S+RM network swit...
£525.50
£437.92
|
---|---|---|---|---|---|---|
SKU |
IGS-5225-16T4S
|
WS-C2960X-24PS-L
|
IES-0620
|
GEP-2651
|
XS508M-100EUS
|
CRS328-24P-4S+RM
|
Description |
PLANET IGS-5225-16T4S, a new industrial Layer 2+ managed Gigabit Switch, features 16 10/100/1000Mbps ports and 4 100/1000X SFP ports, and supports static Layer 3 routing in a 1U case. With a total switch fabric of 40Gbps, the IGS-5225-16T4S can handle large amounts of data in a secure topology linking to an industrial backbone or high capacity servers. The IGS-5225-16T4S is capable of providing non-blocking switch fabric and wire-speed throughput in the temperature range from -40 to 75 degrees C without any packet loss and CRC error. It greatly simplifies the tasks of upgrading the industrial LAN for catering to increasing bandwidth demands. Furthermore, it adopts user-friendly “Front Access” design for easy wiring and maintenance of the IGS-5225-16T4S when placed in the cabinet. AC and DC Redundant Power to Ensure Continuous Operation The IGS-5225-16T4S possesses a 100~240V AC power supply and dual 36~60V DC power supply utilized as redundant power supply to ensure its continuous operation. Its redundant power system is specifically designed to handle the demands of high-tech facilities requiring the highest power integrity. Furthermore, with the 36~60V DC power supply implemented, the IGS-5225-16T4S can be applied as a telecom level device and placed in almost any difficult environment. Digital Input and Digital Output for External Alarm To help the network administrators efficiently manage unexpected network situations, the IGS-5225-16T4S provides Digital Input and Digital Output for external alarm device on the front panel. The Digital Input can be used to detect and log the status of the external devices such as door intrusion detector. The Digital Output could be used to send alarm whenever the IGS-5225-16T4S has port link-down or power failure. Effective Alarm Alert for Better Protection The IGS-5225-16T4S supports a Fault Alarm feature which can alert the users when there is something wrong with the switches. With this ideal feature, the users would not have to waste time to find where the problem is. It will help to save time and human resource. IPv6/IPv4 Dual Stack Supporting both IPv6 and IPv4 protocols, the IGS-5225-16T4S helps data centers, campuses, telecoms, and more to experience the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up. Layer 3 IPv4 and IPv6 VLAN Routing for Secure and Flexible Management The IGS-5225-16T4S offers IPv4/IPv6 VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly-secure,flexible management and simpler networking application. Robust Layer 2 Features The Switch can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2 to Layer 4 QoS, bandwidth control and IGMP/MLD Snooping. Via the link aggregation of supporting ports, the IGS-5225-16T4S allows the operation of a high-speed trunk to combine with multiple fiber ports and supports fail-over as well. Powerful Security The IGS-5225-16T4S offers a comprehensive layer 2 to layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X Port-based and MAC-based user, and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The IGS-5225-16T4S also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Excellent Traffic Control The IGS-5225-16T4S is loaded with powerful traffic management and QoS features to enhance connection services by telecoms and ISPs. The QoS features include wire-speed Layer 4 traffic classifiers and bandwidth limit that are particularly useful for multi-tenant units, multi-business units, Telco and network service providers’ applications. It also empowers the industrial environment to take full advantage of the limited network resources and guarantees the best performance in VoIP and video conferencing transmission. Efficient and Secure Management With built-in Web-based management interface, the IGS-5225-16T4S L2+ Managed Switch offers an easy-to-use, platform-independent management and configuration facility which includes Console, Web and SNMP management interfaces. The SNMP can be managed via any management software based on the standard of SNMP Protocol. For reducing product learning time, it offers Cisco-like command via Telnet or console port and customer does not need to learn new console command. Moreover, it also offers secure remote management by supporting SSH, SSL and SNMP v3 connections which encrypt the packet content at each session. Flexibility and Extension Solution The four mini-GBIC slots built in the IGS-5225-16T4S support dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules. Now the administrator can flexibly choose the suitable SFP transceiver according to not only the transmission distance, but also the transmission speed required. The distance can be extended from 550 meters to 2km (multi-mode fiber) or up to 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the industrial data centers and distributions. Intelligent SFP Diagnosis Mechanism The IGS-5225-16T4S supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
|
The Cisco Catalyst 2960X-24PS-L Network Switch is a fixed-configuration, stackable Gigabit Ethernet switch that provides enterprise-class access for campus and branch applications. This Ethernet switch operates on Cisco IOS Software and supports simple device and network management. It offers advanced Layer 2 and Layer 3 features as well as optional PoE+ power. The switches deliver enhanced application visibility, network reliability and network resiliency.
|
LevelOne IES-0620 Industry Ethernet Switch provides 4 PoE ports 10/100/1000Base plus 2 port Gigabit SFP to enable high speed network at mission-critical environment. With the industrial standard DIN-rain mount; this switch can be easily installed in the cabinet, plus the clearly visible status LEDs provide simple monitoring of port link activity. Moreover, the SFP slots support pluggable modules that enabling you to choose from a variety of transceivers. This switch is Power Sourcing Equipment (PSE), and it is fully complied with IEEE 802.3at PoE standard at maximum 30W power budget per port. It helps to save infrastructure wiring costs dramatically by eliminating electric wiring and less UPS needed. Also, it is compatible with IEEE802.3af standard PD devices.
- 4 10/100/1000Base-T PoE ports - 1 Gigabit Combo + 1 Gigabit SFP(100/1G) slot - PoE ports can support the IEEE 802.3at standard and power up 30W - 1000 Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex, - Auto-Negotiation, Auto-MDI/MDIX - 40°C to 75°C (-40°F to 167°F) operating temperature range - DIN-Rail mount installation - Metal case design and compliant with IP30 standard - Wide input power range 12 to 55VDC |
GEP-2651 Web Smart Gigabit PoE Switch is a next-generation Ethernet Switch offering powerful L2 features, Layer 3 Static Route, better PoE functionality and usability that delivers the cost-effectively business and transports Ethernet services via fiber or copper connections. GEP-2651 delivers 24 (10M/100M/1G) RJ45/PoE+ (Support 802.3at/af, and total up to 185W) ports and 2 Combo GbE RJ45/SFP ports. GEP-2651 provides high HW performance and environment flexibility for SMBs and Enterprises. GEP-2651 is ideal to deliver management simplicity, optimum user experience, and lower total cost of ownership. The embedded Device Managed System is designed to be extremely easy-to-use/manage/install IP Phone, IP Cam, or Wifi-AP for Enterprise Applications.
Key Features - 24 PoE-Plus Gigabit Ethernet ports and 2 Gigabit SFP slots - QoS control for traffic prioritization and bandwidth management - DHCP Client/Server - Supports IPv4/IPv6 network operation - Minimize carbon footprint with advanced energy efficient technology (IEEE 802.3az) - IEEE 802.1d/w/s Spanning Tree Protocol (STP) and port mirroring - IP Multicast Filtering through IGMP Snooping V1 / V2 / V3 - Supports port-based VLAN, IEEE 802.1Q VLAN Tagging - IEEE 802.3ad LACP for auto port aggregation |
NETGEAR XS508M. Switch type: Unmanaged. Basic switching RJ-45 Ethernet ports type: 10G Ethernet (100/1000/10000). MAC address table: 2000 entries, Switching capacity: 160 Gbit/s. Networking standards: IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3an, IEEE 802.3aq, IEEE 802.3az,.... Power connector: DC-in jack. Rack mounting
|
CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. PoE-Out is passed over mode B pins (4,5+)(7,8-). The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included).
CRS328-24P-4S+RM comes in a 1U rackmount case with 100-240 V AC 500 W power supply built-in. The device consumes up to 44 W leaving guaranteed 450 W (3x150 W per every 8 Ethernet ports) to power your PoE devices. Each port can provide up to 30 W of power with any power output option you choose. The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with disruptive price, providing best price/performance on the market. |
Short Description |
Industrial L2+ 16-Port 10/100/1000T + 4-Port 100/1000X SFP Managed Ethernet Switch
|
Catalyst 2960X-24PS-L Network Switch, 24 Gigabit Ethernet Ports, 370W PoE Budget, four 1 G SFP Uplink Ports, Enhanced Limited Lifetime Warranty (WS-C2960X-24PS-L)
|
4x PoE 10/100/1000Base, 1x Gigabit SFP, 1x Gigabit Combo SFP/RJ-45, 1024 MAC, 12Gbps
|
24 x RJ-45 PoE, 2 x RJ-45/SFP, 128MB RAM, 32 MB Flash, 100-240 VAC, 50-60 Hz, 52Gbps, 3100 g
|
NETGEAR XS508M, Unmanaged, 10G Ethernet (100/1000/10000), Rack mounting
|
ARM 32bit, 98DX3236, 800 MHz, 443 x 300 x 44 mm, 512 MB, 16 MB, -20°C to 60°C494 W, 44 W, 2 fans, 1000 mA, 20 A
|
Manufacturer |
Planet
|
Cisco
|
LevelOne
|
LevelOne
|
Netgear
|
Mikrotik
|