LevelOne RJ45 to SC Managed Fast Ethernet Media Converter, Multi-Mode Fiber

VHW-HW

VHW-HWPS-B

IEC-4000

IEC-4301

IEC-4001

HIGHWIRE Ethernet Over Coax Device (Single Unit). HIGHWIRE turns any analogue video cable into a high-speed network connection, enabling the replacement of analogue cameras with IP cameras without installing any new cabling. - HIGHWIRE can be powered by legacy 12 Volt DC or 24 Volt AC supplies. - HIGHWIRE turns any analogue video cable into a high-speed network connection, enabling the replacement of analogue cameras with IP cameras without installing any new cabling or configuration. - HIGHWIRE can provide a full-duplex 100BASE-T network connection, with no bandwidth restrictions, over 500 metres of RG-11 cable, or over 280 metres of CCTV-grade RG-59 cable.

Fast Ethernet and POE power over coax video cable
HIGHWIRE POWERSTAR lets you install IP cameras easily, quickly, and reliably, without the disruption and expense of installing new cable.

Support for your camera is assured, thanks to HIGHWIRE's unique full-rate Ethernet over Coax technology, which has been tested and trusted by thousands of IP installers worldwide over the past five years.

And now with POE over Coax, you can deliver up to 25 watts of POE power to the camera as well, eliminating the complexity of installing local power supplies.

Simply add power
With no configuration or measurement required, installation of HIGHWIRE PowerStar is as straightforward as plugging it in.

Two models are used, as shown in the diagram below. The BASE unit receives POE power and transmits it down the coax. The CAMERA unit receives power from the coax and delivers up to full POE Plus power to the IP camera.

If PoE is not available, or for an extra power boost at either end of the cable, just connect the optional power supply.

Installer friendly
For fast installation and guaranteed performance, HIGHWIRE POWERSTAR features Veracity's unique SafeView display.

SafeView provides an instant and easy-to-understand confirmation of network and power status right across the cable, with no need to access remote equipment to check connections.

Meanwhile, safe and compliant detection of POE equipment and POE over coax compatibility ensures correct operation, with no risk of damage to non-POE or legacy analog equipment.

Reliability assured
Because the length and quality of installed coaxial cable is hard to predict or measure, it is important to have confidence that the cable you are upgrading has the capacity to deliver continuous, reliable power to the new IP camera.

However, thanks to HIGHWIRE POWERSTAR's ultra low-power design and efficient power delivery, even the lowest grade of cheap RG-59 will support a 10 watt IP camera at any range likely to be found in a legacy installation. And once connected, the SafeView power display instantly reaffirms that the actual power available to the camera is sufficient.

For predictable network performance, HIGHWIRE's proven technology delivers full network bandwidth, right to the limits of range. And secure screw-terminal DC connections, or the option of using a UPS-backed POE source, provide the last link in assuring continuous power delivery.

LevelOne IEC-4000 is an industrial Fast Ethernet media converter with a mini size, rugged aluminium case which providing superb heat dissipation. This converter is designed to be mounted on an industrial standard DIN-rail, as well as on the wall, plus the clearly visible status LEDs provide simple monitoring of port link activity. It also features Link Fault Pass Through in order to alert remote location when link status changes.

10/100BaseT to 100Base-FX

- Rugged aluminium case design in a mini size form factor
- 18V-36VAC & 12V-60VDC with polarity protection
- Link Fault Pass through (LFP) function
- Supports switch and pure converter mode
- Surge & ESD protection
- Maximum noise & interference immunity
- 40°C to 75°C (-40°F to 167°F) operating temperature range
- DIN-Rail or panel mount installation

LevelOne IEC-4301 is an industrial Fast Ethernet media converter with a mini size, rugged aluminium case which providing superb heat dissipation. This converter is designed to be mounted on an industrial standard DIN-rail, as well as on the wall, plus the clearly visible status LEDs provide simple monitoring of port link activity. It also features Link Fault Pass Through in order to alert remote location when link status changes.

- 10/100BaseT to 100Base-FX
- Rugged aluminium case design in a mini size form factor
- 18V-36VAC & 12V-60VDC with polarity protection
- Link Fault Pass through (LFP) function
- Supports switch and pure converter mode
- Surge & ESD protection
- Maximum noise & interference immunity
- 40°C to 75°C (-40°F to 167°F) operating temperature range
- DIN-Rail or panel mount installation

LevelOne IEC-4001 is an industrial Fast Ethernet media converter with a mini size, rugged aluminium case which providing superb heat dissipation. This converter is designed to be mounted on an industrial standard DIN-rail, as well as on the wall, plus the clearly visible status LEDs provide simple monitoring of port link activity. It also features Link Fault Pass Through in order to alert remote location when link status changes. - 10/100BaseT to 100Base-FX - Rugged aluminium case design in a mini size form factor - 18V-36VAC & 12V-60VDC with polarity protection - Link Fault Pass through (LFP) function - Supports switch and pure converter mode - Surge & ESD protection - Maximum noise & interference immunity - 40°C to 75°C (-40°F to 167°F) operating temperature range - DIN-Rail or panel mount installation

Ethernet over coax converter

Highwire Base Unit, 1.5W, 100Base-T Ethernet, Blue

10/100Mbps, RJ-45, 100Base-X SFP, 90 g

10/100Mbps, RJ-45, SC, 30 km

10/100Mbps, RJ-45, SC, MMF, 2 km

Veracity

Veracity

LevelOne

LevelOne

LevelOne