Fractal Design Define 7 XL Midi Tower Black

FD-C-MES2X-02

CC-9011211-WW

CC-9011213-WW

FD-C-TOR1A-05

CS-HYTE-Y60-BW

Bigger, bolder and better? With more of everything, the Meshify 2 XL is ready to take on your most ambitious builds.

Detachable front filter
- The nylon filter is easily removed from the hinged mesh panel for increased airflow
- Tether-free bezel for easier access to front fan mounts
- Three pre-installed Dynamic X2 GP-14 fans and room for more (max 9x 140 mm / 11x 120 mm)

Superlative storage
- Optional accessories allow expansion up to 18 HDDs and 5 SSDs in Storage Layout
- The included Multibrackets lets you convert any unused fan positions to HDD, SSD or pump mounts
- Tool-less, top-latching panels allow quick access while preventing accidental drops

Flexible dual-layout design
- Convert to Open Layout and get more than enough room for your custom water loop with large reservoirs and radiators up to 480 mm
- Support for radiators up to 480/420 mm (front), 480/420 mm (top) and 280/240 mm (base)
- An expansive internal layout easily accommodates large motherboards up to E-ATX and SSI-EEB

Open and interchangeable
Remove the entire top to build and route with zero hindrance.

Type-C interface
USB 3.1 Gen 2 Type-C front I/O offers fast-charging and speeds up to 10Gbps

Nexus+ 2 fan hub
Ultra-slim Nexus+ 2 fan hub connects 3x PWM fans and 6x 3-pin fans

Versatile multibrackets
The included Multibrackets lets you convert unused fan positions to HDD, SSD or pump mounts

Easy cable management
Detachable PSU cable shield and integrated cable guides with velcro straps further simplify cable management behind the board

The CORSAIR 5000D AIRFLOW is a mid-tower ATX case that shows off your PC, and not its cables. Hidden cable management and an airflow-optimized front panel make building a clean, cool PC easy, with two included CORSAIR AirGuide fans.

MID-TOWER ATX CASE
FOR AN IMMACULATE BUILD THAT KEEPS ITS COOL
The CORSAIR 5000D AIRFLOW is a mid-tower ATX case with easy cable management for a clean build, with room for a 360mm push pull radiator, a high-airflow front panel, and two included CORSAIR AirGuide fans for concentrated airflow.

Clean and Cool
An optimized steel front panel delivers massive airflow to your system for maximum cooling.

Maximum cooling potential
A spacious interior fits up to 10x 120mm or 4x 140mm cooling fans, along with multiple radiators including up to a 360mm in front or side and a 360mm push/pull in the roof.

There's no replacement for displacement
The 5000D AIRFLOW isn’t your run-of-the-mill, standard mid-tower ATX case. Its brilliantly engineered interior offers incredible expansion capability for liquid cooling.

Powerful directed Airflow
Equipped with two CORSAIR AirGuide 120mm fans featuring anti-vortex vanes to concentrate airflow and enhance cooling.

Take command of your cooling
A PWM fan repeater controls the included fans, with connections for up to six in total. Reduce fan speed when you want to keep your system quiet, or increase when you want to push its performance, all from a single 4-pin PWM header on your motherboard.

Extreme Cooling
Maximum Cooling Potential: A spacious interior fits up to 10x 120mm or 4x 140mm cooling fans, along with multiple radiators including up to a 360mm in front and a 360mm push/pull in the roof.

Modern Front Panel I/O
Puts your connections within easy reach, including a USB 3.1 Type-C Port, 2x USB 3.0 port, and a combination audio/microphone jack.

vertical gpu mount ready
With included vertical PCIe slots and a screw mount for a CORSAIR PCI-Express 3.0 extension cable (sold separately), you can show off your GPU and keep it secure at the same time.

The CORSAIR iCUE 5000X RGB is a mid-tower ATX case that shows off your PC, and not its cables. Four stunning tempered glass panels and three included CORSAIR SP RGB ELITE fans put your PC on display.

5000X RGB
MID-TOWER ATX CASE
FOR A CRYSTAL-CLEAR BUILD THAT KEEPS ITS COOL
The 5000X RGB makes a stunning, showpiece-worthy PC easy to build and easier to keep cool with the space and flexibility to mount multiple 360mm radiators, all surrounded by beautiful tempered glass on four sides.

Clear, Clean, and Cool
Four tempered glass panels show off your showpiece-worthy PC, while generous dust-filtered air channels provide minimal obstruction and ample airflow.

Maximum cooling potential
The 5000X RGB has incredible flexibility when it comes to cooling. With up to ten 120mm fan mounts, three included SP RGB ELITE fans with CORSAIR AirGuide technology and three seperate 360mm radiator locations, the only limit to your cooling options is your imagination.

There's no replacement for displacement
The 5000X RGB isn't your run-of-the-mill, standard mid-tower ATX case. Its brilliantly engineered interior offers incredible expansion potential for liquid cooling.

Powerful directed Airflow
Equipped with three CORSAIR SP RGB ELITE 120mm fans featuring AirGuide technology with anti-vortex vanes to concentrate airflow and enhance cooling.

Take command of your cooling
A PWM fan repeater controls the included fans, with connections for up to six in total. Reduce fan speed when you want to keep your system quiet, or increase when you want to push its performance, all from a single 4-pin PWM header on your motherboard.

Extreme Cooling
Maximum Cooling Potential: A spacious interior fits up to 10x 120mm or 4x 140mm cooling fans, along with multiple radiators including up to a 360mm in front and a 360mm push/pull in the roof.

Smart rgb lighting out-of-the-box
Fully control and synchronize the RGB lighting for up to six fans with the included iCUE Lighting Node CORE and CORSAIR iCUE software.

Modern Front Panel I/O
Puts your connections within easy reach, including a USB 3.1 Type-C Port, 2x USB 3.0 port, and a combination audio/microphone jack.

vertical gpu mount ready
With included vertical PCIe slots and a screw mount for a CORSAIR PCI-Express 3.0 extension cable (sold separately), you can show off your GPU and keep it secure at the same time.

Built to maximize cooling potential straight out of the box, the Torrent comes with a brand-new component layout and two custom-made 180 x 38 mm Dynamic PWM / Prisma RGB fans. The Torrent is a perfect fit for anyone serious about high-end cooling – with or without a custom water loop.

Top-tier airflow
- Designed for exceptional performance at controlled sound levels with included fan hub
- The 38 mm thick blades leverage power, size, and thickness for massive air-moving capacity
- Streamlined through and through for component breathing room and superlative airflow

Let your system breathe
- New layout with expansive base intakes and extra-large bottom fan support offers exceptional GPU cooling
- Optional front and bottom nylon filters included, allowing the user to prioritize between dust filtering or even higher airflow
- Streamlined open interior provides plenty of breathing room for components and maximizes performance potential for both air and water cooling

Next level GPU cooling
Expansive base intakes and extra-large bottom fan support

Streamlined inside and out
- Front fan brackets allow for unblocked airflow to the larger fans while catering to standard radiator and fan sizes
- Both front and bottom panel can support extra-thick radiators and push-pull fan configurations up to 420 mm
- Seven bridgeless expansion slots allow for extensive customization

Quick start, clean finish
- Comes with external cable straps for tidying up behind your computer
- New, pre-installed Nexus 9P Slim PWM fan hub
- Removable top bezel and cable guides with cable straps make for easy installation and cable management
- Two sturdy steel drive trays with vibration-damping rubber grommets for smooth, quiet and reliable operation
- Four dedicated SSD brackets included

Included GPU support bracket
Helps your GPU stay level (user assembled, instructions included)

Transparently easy
- Seamless tempered glass panels (on TG models) with bolt-free top-latching mechanisms for easy handling
- Top mounted aerodynamic PSU shroud with integrated ARGB effects (TG versions only)
- Integrated support for a water-cooling reservoir on the motherboard tray

Panoramic Views
No corner pillar. The Y60 features a 3-piece panoramic tempered glass design for the ultimate photo and display potential. See your build the way it was meant to be seen from the left or right side of your desk with a simple turn.

Exclusively Vertical GPU Mounted
Why would you want to see your graphics card any other way?

Included PCIE 4.0 Riser Cable
A protective riser cable canopy integrates beautifully into the case, allowing for half-height PCIE cards behind the throne of the vertical graphics card. The protective shroud is the first of its kind, made specifically for the Y60.

Antechamber Construction
Segment cables from thermal components and turn your PC into a work of art.

Cold Floor Cooling
Eliminate hot spots with sweeping lateral vents from fans tastefully tucked into the basement of the Y60.

Included Fans
The three pre-installed Flow FE12 fans with fluid-dynamic bearings provide whisper-quiet operation.

Meshify 2 XL Light Tempered Glass E-ATX/ATX/mATX/Mini-ITX/EE-ATX/SSI-CEB/SSI-EEB, 2xUSB 3.0, USB 3.1 Gen 2 Type-C, Mic, Audio, Steel

Mid-Tower, 2 x 3.5", 4 x 2.5", 2 x USB 3.0, USB 3.1 Type-C, White

Mid-Tower, 2 x 3.5", 4 x 2.5", 2 x USB 3.0, USB 3.1 Type-C, White

E-ATX/ATX/mATX/ITX/SSI-EEB/SSI-CEB, USB 3.1 Gen 2 Type-C, 2xUSB 3.0, HD Audio, Steel, Dust filters

60 L, Mid-Tower, EATX/ATX/mATX/ITX, 9.6 kg, White/Black

Fractal Design

Corsair

Corsair

Fractal Design

HYTE