Equip 2-Port Cat.5e RJ45 Splitter

RJ45SPLITTER

TL-POE10R

MPK402-M

22-2138

22-2130

The RJ45SPLITTER 2-to-1 RJ45 Splitter Cable Adapter increases the number of RJ45 network connections on an RJ45 outlet, allowing two 10/100 Ethernet signals through a single Cat5/Cat5e wire.

On one end of the installation the splitter enables you to connect two patch cables from a hub or switch to a single port on a patch panel; while on the other end of the installation the splitter connects to a single Cat5/Cat5e network drop through a wall outlet which can then be split and connected to two separate devices. The patch panel and wall outlet are connected through a single Cat5/Cat5e cable.

Designed and constructed for maximum durability, this Ethernet Splitter Cable is backed by StarTech.com's Lifetime Warranty.

TP-LINK’s PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard. It can receive power and data from all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Injector, such as TP-LINK's TL-SG3424P, TL-SF1008P, TL-POE150S or other equivalent products, then split electric power and data into two cables, so you can install the non-PoE devices like Wireless Access Points, IP Cameras or IP Phones, in remote location where there are no power lines or outlets, where you wish to fix these devices.

The MPK402-M Y-Adapter RJ45 to 2xRJ45 F/F 8P allows you to split a single RJ45 connection into two, offering a convenient solution for expanding your network capabilities. This adapter features female RJ45 connectors on both ends, ensuring seamless connectivity. Ideal for situations where you need to connect two devices to a single network port, this adapter offers a cost-effective and simple solution. Benefit from MicroConnect's commitment to quality with this reliable adapter, designed to meet European standards and provide a secure and stable network connection. Trust MicroConnect's 20+ years of expertise to deliver innovative networking solutions that enhance your connectivity experience.

Enables an additional signal to be transmitted down the unused pairs of Cat5e twisted-pair cable.

Allows expansion of an existing system without the need to disrupt the cable infrastructure.

Used in pairs, one at each end of the cabling.

Provides for instant network expansion.

Although sold individually, the units must be used in pairs, with a device at either end of the cabling.

PLEASE NOTE
These units must be used in pairs, with a device at either end of the existing cabling.
They are not suitable for telephones off broadband connections.
They Must be used with patch panels & faceplates only.

Enables an additional signal to be transmitted down the unused pairs of Cat5e twisted-pair cable.

Allows expansion of an existing system without the need to disrupt the cable infrastructure.

Used in pairs, one at each end of the cabling.

Provides for instant network expansion.

Although sold individually, the units must be used in pairs, with a device at either end of the cabling.

PLEASE NOTE
These units must be used in pairs, with a device at either end of the existing cabling.
They are not suitable for telephones off broadband connections.
They Must be used with patch panels & faceplates only.

StarTech.com 2-to-1 RJ45 Splitter Cable Adapter - F/M

IEEE 802.3/802.3u/802.3ab/802.3af, 10/100/1000Mbps, PoE

RJ45-2xRJ45, F/F

RJ-45/Cat5e

RJ-45 - 2 x RJ-45, M/F, Cat5e

StarTech.com

TP-LINK

Microconnect

Cablenet

Cablenet