Barco ClickShare Remote control Black

939-001647

939-001644

939-001817

952-000047

952-000080

Rally Mic Pod Hubs provide installers with the flexibility to customize microphone placement on virtually any conference table. An alternative to daisy-chaining mic pods to one another, Rally Mic Pod Hub provides three connections that support any combination of mic pods or additional hubs. Under-table mounting hardware helps conceal cables for a clean look. Eliminate the back-and-forth cabling on U-shaped or asymmetrical conference tables and add placement flexibility. With three connections for an array of mic pods, Rally Mic Pod Hub cleans up cabling so you can place mic pods within easy reach of meeting room participants.

Achieve a streamlined installation of each Rally system component with included brackets and mounting hardware. Camera bracket provides a secure, stable wall mount above or below the display, or cleverly inverts for near-ceiling installations. Mount speakers directly to the wall with low-profile brackets. Position hubs on a wall or beneath a table with ventilated hardware, then secure connections with the cable retention brackets for a professional appearance.

Designed to conserve table space in huddle rooms and for stand-up operation in hallways and open areas, the Logitech Tap Wall Mount offers convenient access to touch controls. A magnetic cable dock neatly holds an HDMI cable for wired content sharing. Compatibility with Tap’s rear and bottom cable exits supports cable routing either within or down the wall. Tap's integrated strain relief and retention mechanisms keep connections tight.

Rally Mic Pod Extension Cable adds 10 meters of additional reach to the cabling of Rally Mic Pod or Rally Mic Pod Hub, and is plenum-rated and Eca/IEC 60332-1-2 compliant for commercial installation in walls, above ceilings, through raceways, and within standard 19mm conduit.

When used with Rally Bar and Rally Bar Mini, two cables can connect for a total extension of 20 meters. In rooms with Rally or Rally Plus, connect Rally Mic Pod Extension Cable directly to the table hub to accommodate larger tables. A built-in cable clip keeps connections tight and secure.

Riser Mount for Logitech Tap
Elevated table mount with swivel and cable management for Logitech Tap and Tap IP meeting room touch controllers.

LOGITECH TAP RISER MOUNT
Designed for conference room tables with center-located grommet holes, the Riser Mount secures the touch controller in place and elevates the display angle to 30° for better visibility and easier operation while seated. Tap Riser Mount maintains a clean tabletop by routing cables through the grommet hole, and swivels 180° for convenient operation from both sides of the table.

RAISED PROFILE FOR AN EASIER REACH
Elevates the touch controller to a 30° display angle and swivels 180° for easier operation when reaching a center-of-table mounting location.

Fits Most Tables
Adjusts to tables up to 50mm in thickness, and through grommet holes from 51 - 89mm in diameter.

INTEGRATED CABLE MANAGEMENT
Supports down-routing of cables through the grommet hole for a clean appearance.

Rally Mic Pod Hub for the Rally Ultra-HD ConferenceCam

Rally Mounting Kit for the Rally Ultra-HD ConferenceCam

Tap Wall Mount

Rally Mic Pod Extension Cable

New Riser Mount for Group

Logitech

Logitech

Logitech

Logitech

Logitech